Toluene diisocyanate manufacturer Knowledge n-Propylbenzene n-Propylbenzene

n-Propylbenzene n-Propylbenzene

n-propyl benzene structural formula

Structural formula

Business number 02NY
Molecular formula C9H12
Molecular weight 120.19
label

1-phenylpropane,

propylbenzene,

1-Phenylpropane,

Propylbenzene,

Cellulose acetate solvent,

hydrocarbon solvents,

For organic synthesis

Numbering system

CAS number:103-65-1

MDL number:MFCD00009377

EINECS number:203-132-9

RTECS number:DA8750000

BRN number:1903006

PubChem number:24887947

Physical property data

1. Properties: colorless and transparent liquid[1]

2. Melting point (℃): -99.5[2]

3. Boiling point (℃): 159.2[3]

4. Relative density (water=1): 0.862[4]

5. Relative vapor density (air=1): 4.14[5]

6. Saturated vapor pressure (kPa): 0.33 (20℃) [6]

7. Heat of combustion (kJ/mol): -5209.9[7]

8. Critical temperature (℃): 365.6[8]

9. Critical pressure (MPa): 3.24[9]

10. Flash point (℃): 30 (CC) [10]

11. Ignition temperature (℃): 450[11]

12. Explosion upper limit (%): 6.0[12]

13. Explosion lower limit (%): 0.8[13]

14. Solubility: Insoluble in water, miscible in most organic solvents such as ethanol, ether, acetone and so on. [14]

15. Relative density (25℃, 4℃): 0.8579

16. Refractive index at room temperature (n25): 1.4895

17. Critical density (g·cm-3): 0.273

18. Critical volume (cm3·mol-1): 440

19. Critical compression factor: 0.265

20. Eccentricity factor: 0.346

21. Solubility parameter (J·cm-3)0.5: 17.805

22. van der Waals area (cm2·mol-1): 1.012×1010

23. van der Waals volume (cm3 ·mol-1): 79.970

24. Gas phase standard combustion heat (enthalpy) (kJ·mol-1): -5264.48

25. Gas phase standard claimed heat (enthalpy) (kJ·mol-1): 7.91

26. Gas phase standard entropy (J·mol-1 ·K-1): 398.19

27. Gas phase standard free energy of formation (kJ·mol-1): 138.16 p>

28. Gas phase standard hot melt (J·mol-1·K-1): 146.90

29. Liquid phase standard Heat of combustion (enthalpy) (kJ·mol-1): -5218.24

30. Liquid phase standard claims heat (enthalpy) (kJ·mol-1 sup>): -38.33

31. Liquid phase standard entropy (J·mol-1·K-1): 287.78

32. Liquid phase standard free energy of formation (kJ·mol-1): 124.85

33. Liquid phase standard hot melt (J·mol-1 ·K-1): 214.72

Toxicological data

1. Acute toxicity[15]

LD50: 6040mg/kg (rat oral)

LC50 ���319150mg/m3 (rat inhalation, 2h)

2. Irritation No information available

Ecological data

1. Ecotoxicity[16]

IC50: 2mg/L (24h) (Daphnia)

LC50: 1.5mg/L (4d) (rainbow trout)

2. Biodegradability No data available

3. Non-biodegradability [17] In the air, when the concentration of hydroxyl radicals is 5.00×105 pieces/cm3, the degradation half-life is 2d(theory).

4. Bioaccumulation [18] BCF: 138 (theoretical)

5. Other harmful Effect[19] This substance may be harmful to the environment, and special attention should be paid to aquatic life and birds. Bioaccumulates in mammals.

Molecular structure data

1. Molar refractive index: 40.43

2. Molar volume (cm3/mol): 138.7

3. Isotonic specific volume (90.2K ): 323.6

4. Surface tension (dyne/cm): 29.6

5. Dielectric constant: 2.33

6. Dipole moment (10-24cm3):

7. Polarizability: 16.02

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 0

3. Number of hydrogen bond acceptors: 0

4. Number of rotatable chemical bonds: 2

5. Number of tautomers: none

6. Topological molecule polar surface area 0

7. Number of heavy atoms: 9

8. Surface charge: 0

9. Complexity: 60.4

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. Stability[20] Stable

2. Incompatible substances[21] Strong oxidants, acids, halogens, etc.

3. Polymerization hazards[22] No polymerization

Storage method

Storage Precautions[23] Store in a cool, ventilated warehouse. Keep away from fire and heat sources. The storage temperature should not exceed 37°C. Keep container tightly sealed. should be kept away from oxidizer, do not store together. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials.

Synthesis method

1. Prepared by the action of diisoester sulfate and benzyl magnesium chloride.

Purpose

1. Used as textile dye and printing, and as acetate fiber solvent.

2. Used as solvent and organic synthesis. [24]

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.chemicalchem.com/archives/24595

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search