4-Heptanone 4-Heptanone

4-Heptanone Structural Formula

Structural formula

Business number 03GA
Molecular formula C7H14O
Molecular weight 114.19
label

Methyl amyl ketone,

lactoketone,

dipropyl ketone,

heptanone,

Propyl ketone,

Dipropyl ketone,

Butyrone,

food additives,

Flavor enhancer

Numbering system

CAS number:123-19-3

MDL number:MFCD00009403

EINECS number:204-608-9

RTECS number:MJ5600000

BRN number:1699049

PubChem number:24869929

Physical property data

1. Properties: Colorless and transparent liquid with strong ethereal and fruity aroma, including cheese, jackfruit, etc.

2. Boiling point (ºC, 101.3kPa): 144.0

3. Melting point (ºC): -33

4. Relative density (g/mL, 20/4ºC): 0.8145

5. Refractive index (21.7ºC): 1.40732

6. Viscosity (mPa·s, 25ºC): 0.685

7 .       Flash point (ºC, ASTM, open): 48

8.     Heat of evaporation (KJ/kg, b.p.): 317

9.     Heat of formation (KJ/mol, gas) :298.52

10. Heat of combustion (KJ/mol): 4400

11. Specific heat capacity (KJ/(kg·K), 20~40ºC, constant pressure): 2.310

p>

12. Body expansion coefficient (K-1, about 20ºC): 0.001073

13. Body expansion coefficient (K-1 , about 55ºC): 0.001115

14. Solubility: Miscible with various organic solvents such as alcohols and ethers. It can dissolve raw rubber, nitrocellulose, grease, natural resin and various vinyl synthetic resins. It dissolves 0.43% in water at 20℃; water dissolves 0.87% in 4-heptanone.

15. Relative density (20℃, 4℃): 0.8160

16. Relative density (25℃, 4℃): 0.8116

17. Normal temperature Refractive index (n20): 1.4067

18. Refractive index at room temperature (n25): 1.4045

19. Critical Temperature (ºC): 328.85

20. Critical density (g·cm-3): 0.263

21. Critical volume (cm3 ·mol-1): 434

22. Liquid phase standard combustion heat (enthalpy) (kJ·mol-1): -4457.13

23. The liquid phase standard claims heat (enthalpy) (kJ·mol-1): -298.32

Toxicological data

1. Acute toxicity: Rat oral LD50: 3730uL/kg; Rat inhalation LC50: 2690ppm/6H

Mouse intravenous LDLO: 271mg/kg; rabbit skin LD50: 5660uL/kg

2. Other multiple dose toxicity: rat oral TDLO: 30gm/kg/3W-I; rat oral TDLO : 130gm/kg/13W-I

3. The toxicity caused by oral or skin absorption is very small, but it is irritating to mucous membranes.

Ecological data

None yet

Molecular structure data

1. Molar refractive index: 34.50

2. Molar volume (cm3/mol): 141.2

3. Isotonic specific volume (90.2K): 315.7

4. Surface tension (dyne/cm): 24.9

5. Polarizability (10-24cm3): 13.68

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): 1.6

2. Number of hydrogen bond donors: 0

3. Number of hydrogen bond acceptors: 1

4. Number of rotatable chemical bonds: 4

5. Number of tautomers: 2

6. Topological molecule polar surface area 17.1

7. Number of heavy atoms: 8

8. Surface charge: 0

9. Complexity: 58.8

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. It is easy to cause combustion when exposed to high heat, open flames or strong oxidants.

2. Exist in smoke.

3. Naturally found in apple juice, papaya, pears, baked potatoes, bread, coffee, peanuts, etc.

Storage method

Keep away from open flames or strong oxidants.

Synthesis method

1. Refining method: Often mixed with other ketones, it is generally refined by distillation. You can also add silver ammonium nitrate solution and stir, let it stand for 30 minutes until it no longer develops color, then wash with water, dry with anhydrous calcium sulfate and then distill.

2. Butyric acid is prepared by precipitating calcium carbonate at 450ºC.

3. Preparation method:

Refer to the above preparation method of 3-pentanone (reference book 335), react with 880g (10mol) of n-butyric acid (2) to obtain 285g of 4-heptanone (1), bp 142~143℃, collected The rate is 46%. [1]

4. Preparation method:

Contains formaldehyde. In the reaction bottle of the reflux condenser, add 123g (2.2mol) of reduced iron powder and 370mL of n-butyric acid (2), stir and heat to reflux for 5 hours. Change to a distillation device, heat and distill under nitrogen protection, and stop supplying nitrogen at a later stage. Intense heat distills out everything that can be distilled out. The crude product was washed with 10% sodium hydroxide solution and water in sequence, dried over anhydrous sodium sulfate, and after rotation and concentration, the residue was rectified and the fractions at 142-144°C were collected to obtain 157-171g of 4-heptanone (1). The rate is 69%~75%. [2]

Purpose

It is mainly used as a solvent for nitrocellulose, nitrocellulose paint and synthetic resin, as well as a raw material for organic synthesis.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.chemicalchem.com/archives/25911

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search