Structural formula
Business number | 049F |
---|---|
Molecular formula | C2H10Cl2N2 |
Molecular weight | 133.02 |
label |
1,2-Ethylenediamine dihydrochloride, Ethylenediamine hydrochloride, Ethylenediamine dihydrochloride, Diaminoethane hydrochloride, Ethylenediamine dihydrochloride, Ethylenediamine dihydrochloride, Ethylenediamine hydrochloride, 1,2-Ethanediamine,dihydrochloride, Chlor-ethamine, Dimethylenediaminediydrochloride, Ethylenediaminehydrochloride, Organic synthesis, pharmaceutical industry |
Numbering system
CAS number:333-18-6
MDL number:MFCD00012524
EINECS number:206-369-6
RTECS number:KV3850000
BRN number:3665235
PubChem number:24845513
Physical property data
1. Physical property data
Properties: white crystal, hygroscopic, able to sublimate
Density (g /mL, 25/4℃): Not available
Relative vapor density (g/mL, air=1): Not available
Melting point (ºC): Not available
Boiling point (ºC, normal pressure): 300
Boiling point (ºC, 5.2kPa): Not available
Refractive index: Not available
Flash point (ºC): Not available
Ratio Optical rotation (º): Not available
Autoignition point or ignition temperature (ºC): Not available
Vapor pressure (kPa, 25ºC ): Not available
Saturated vapor pressure (kPa, 60ºC): Not available
Heat of combustion (KJ/mol): Not available
Critical temperature (ºC): Not available
Critical pressure (KPa): Not available
Log value of oil-water (octanol/water) partition coefficient: not available
Explosion upper limit (%, V/V): not available
Lower explosion limit (%, V/V): Not available
Solubility: Easily soluble in water, aqueous solution is neutral, almost insoluble in ethanol.
Toxicological data
2. Toxicological data:
Acute toxicity: Not available.
Ecological data
3. Ecological data:
1. Other harmful effects: This substance may be harmful to the environment, and special attention should be paid to water bodies.
Molecular structure data
1. Molar refractive index: 18.38
2. Molar volume (cm3/mol): 68.9
3.Isotonic volume (90.2K): 169.7
4. Surface tension (dyne/cm): 36.8
5. Polarizability (10-24cm 3): 7.28
Compute chemical data
None
Properties and stability
None
Storage method
Stored in a cool, dry place and sealed.
Synthesis method
1. Drop ethylenediamine into hydrochloric acid under cooling, and finish the addition in about 4 hours. The end point is ph=3,
After the reaction is completed, stop cooling, decolorize, and filter. The filtrate is evaporated under normal pressure, cooled to precipitate crystals, filtered to dryness, and washed once with distilled water to obtain the finished product.
Purpose
1. Used as analytical reagent. Used in organic synthesis, pharmaceutical industry, etc.