Toluene diisocyanate manufacturer Knowledge Moisture curing resin LC-95 and LC-98 curing agent

Moisture curing resin LC-95 and LC-98 curing agent

author: Post: 12/06/2023 28read Comments Off

Products Introduction
In order to meet the requirements of industrial plastic coatings and special substrate coatings, a two-component moisture curing air was developed Dry acrylic/silicone system.
The above coating system has very high hardness and has excellent damage resistance in a short period of time. And has good adhesion to special substrates.
Plastic coating suitable for special substrates. Such as: nylon, carbon fiber, PVC, etc.

Physics Features

Resin	LC-95	LC-98
Solid content (%)	45	– –
Film-forming fraction (%)	– –	80
Color	3	<1
acid value	3.6	– –
amine value	22	– –
Solvent	Toluene , isobutanol	B Diol

Suggested recipe
Resin LC-95: Curing agent LC-98= 100:25
Diluent: xylene/toluene/n-butanol/ethyl acetate/CAC=40/ 10/30/10/10
Construction time:>20H

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.chemicalchem.com/archives/15530