Chemical Structure
Polyisocyanate polymerized from hexamethylene diisocyanate
Series
Basonat® HB 100 |
None Solvent type |
Basonat® HB 175 MP/X |
Use 1: 1 butyl acetate and Solvesso® 100 Mixed solvents diluted into90% solution span> |
Physical form
Liquid
Shelf Life
Basonat® HB series must be stored in an airtight container as it is sensitive to humidity. In the original unopened packaging, the product can be stored at a temperature of 10°C to 30°C for at least six months. After opening, the shelf life of the product may be shortened.
Product Specifications
Basonat® HB 100
NCO content (DIN EN ISO 11909) |
22 -23% |
|
Viscosity at 23°C (DIN EN ISO 3219) |
2500 -4500mPa·s |
|
Shear rateD |
|
~ 255 |
NCO equivalent represents the weight of Basonat® in the supplied form corresponding to 1 mole of active NCO groups.
Cross-linking Basonat® HB series can be used to cross-link most hydroxyacrylic resins, as well as hydroxyl polyesters.
Dilution tolerance
Basonat® HB series can be diluted with ester solvents, such as butyl acetate, ketone solvents, such as methyl ethyl ketone, glycol ether esters, such as propylene glycol acetate, or aromatic solvents, such as Solvesso® 100 or xylene. Basonat® HB series is not recommended to be diluted to an isocyanate content less than 40%, otherwise turbidity, flocculation, and precipitation may occur during storage. Different storage conditions will result in products with different storage stability.
Application
Basonat® HB series can be used to formulate coatings with high light and weather resistance. Aliphatic isocyanates are sometimes used as primers on different substrates, such as aluminum, many plastics, polymers, etc.
Basonat® HB 100 can be used in situations where Basonat® HB 175MP/X solvent is not suitable. (For example, aromatic solvents can dissolve polystyrene)
Proportion
Calculate the theoretical equivalent amount of isocyanate required for cross-linking. Taking Basonat® HB100 and Macrynal® SM 636 as examples, the calculation formula is as follows: 0.075 [OH value]* [Hydroxy resin solid content]/ [NCO]
For example: Macrynal® SM 636
Solid content % of hydroxyl resin |
70 |
OH value |
135 |
Basonat® HB 100, NCO% |
22 |
0.075×70×135 /22=32.2
Amount of hardener required relative to 100 g of Macrynal® SM 636: Basonat® HB 100 32.2 g,Basonat® HB 175 MP/X 43.0 It must be noted that any solvents, pigments and other additives in the formula do not contain active hydroxyl groups, such as water.
Safety Tips
Basonat® HB series contains trace amounts of hexamethylene diisocyanate, which are reactive and functional isocyanates, so sufficient amounts are required in the application. Safeguard. They are intended for industrial and professional use only and are not suitable for DIY operations. When using these products, the information and recommendations in the product safety data sheet should be consulted in advance. In addition, the application site should have adequate hygiene and protective measures.
Description
The information in this product technical specification is based on our current knowledge and experience. Many factors may affect the formulation and application of our products. The above information does not affect the user's own research and testing. It neither provides any guarantee of performance nor specifies that our products have special applications in a certain field. Any descriptions, images, photographs, data, proportions, weights, etc. provided here are subject to change without prior notice, nor do they serve as a guarantee of product quality. Reviewing relevant owner rights, existing laws, and regulations is the responsibility of users of our products.
Basonat® HB series contains trace amounts of hexamethylene diisocyanate, which are reactive and functional isocyanates, so sufficient amounts are required in the application. Safeguard. They are intended for industrial and professional use only and are not suitable for DIY operations. When using these products, the information and recommendations in the product safety data sheet should be consulted in advance. In addition, the application site should have adequate hygiene and protective measures.
Description
The information in this product technical specification is based on our current knowledge and experience. Many factors may affect the formulation and application of our products. The above information does not affect the user's own research and testing. It neither provides any guarantee of performance nor specifies that our products have special applications in a certain field. Any descriptions, images, photographs, data, proportions, weights, etc. provided here are subject to change without prior notice, nor do they serve as a guarantee of product quality. Reviewing relevant owner rights, existing laws, and regulations is the responsibility of users of our products.