Product Introduction
VESTANAT H12MDI is an alicyclic diisocyanate. It is a low viscosity liquid with a pungent odor. Used in polyurethane synthesis.
Specifications
Performance |
Value |
Unit |
Test method |
|||
NCOContent |
31.8-32.0 |
% Weight |
Calculated from GC |
|||
Purity |
≥99.5 |
% Weight |
Gas phase Chromatography |
|||
Total chlorine |
≤1000 |
ppm |
Vapor pressure (25℃) |
2.1·10-5 |
hPa |
--- |
Flashpoint(Closed cup) |
200 |
℃ |
DIN EN 22 719 |
|||
Randian |
25 |
℃ |
--- |
Properties and description
Alicyclic diisocyanate VESTANAT H12MDI, used as Material made of polyurethane with excellent light stability, weather resistance and mechanical properties. It is also particularly suitable for manufacturing elastomers, water-based PU dispersions and light-cured polyurethane resins. In addition to its superior mechanical properties, VESTANAT H12 MDI also shows excellent hydrolysis resistance and chemical resistance.
Activity and Catalysis
Aliphatic and cycloaliphatic diisocyanates are less reactive than aromatic ones. VESTANAT H12 MDI usually requires the use of appropriate catalysts to accelerate the urethanation reaction, and it is recommended to use organotin catalysts. (such as DBTDL or DBTDAc)
If the reaction is carried out at a relatively high temperature, there is no need to add a catalyst.
Storage and Shipping
VESTANAT H12MDI is sensitive to moisture. If the influence of moisture can be eliminated, it can be stored for at least 6 months without affecting the quality of the above standards.
VESTANAT H12MDI will partially crystallize and deposit at the bottom at temperatures below 25℃. If this happens, it needs to be heated to 40-50℃ and homogenized before use.
VESTANAT H12MDI is supplied in non-recyclable 200KG drums.
Toxicity and Handling
For information on toxicity and handling methods, see the Material Safety Data Sheet for this product.
VESTANAT H12MDI is sensitive to moisture. If the influence of moisture can be eliminated, it can be stored for at least 6 months without affecting the quality of the above standards.
VESTANAT H12MDI will partially crystallize and deposit at the bottom at temperatures below 25℃. If this happens, it needs to be heated to 40-50℃ and homogenized before use.
VESTANAT H12MDI is supplied in non-recyclable 200KG drums.
Toxicity and Handling
For information on toxicity and handling methods, see the Material Safety Data Sheet for this product.