Toluene diisocyanate manufacturer Knowledge 3-Amino-4-hydroxybenzenesulfonic acid 3-Amino-4-hydroxybenzenesulfonic acid

3-Amino-4-hydroxybenzenesulfonic acid 3-Amino-4-hydroxybenzenesulfonic acid

3-amino-4-hydroxybenzenesulfonic acid structural formula

Structural formula

Business number 02DT
Molecular formula C6H9NO5S
Molecular weight 189.19
label

2-amino-1-phenol-4-sulfonic acid,

o-aminophenol sulfonic acid,

2-aminophenol-4-sulfonic acid,

4-Hydroxy-m-aminobenzenesulfonic acid,

p-Hydroxy-m-aminobenzenesulfonic acid,

2-Aminophenol-4-sulfonic acid,

o-Aminophenol-p-sulfonic acid,

2-Aminophenol-1-sulfonic acid,

4-Hydroxymetanilic acid,

aromatic sulfur compounds

Numbering system

CAS number:98-37-3

MDL number:MFCD00007696

EINECS number:202-662-8

RTECS number:None

BRN number:514765

PubChem number:24846256

Physical property data

1. Properties: Colorless to gray-brown rhombus crystals.

2. Density (g/mL, 20℃): Undetermined

3. Relative vapor density (g/mL, air=1): Undetermined

4. Melting point: No melting point, it will start to decompose when heated to above 300ºC.

5. Boiling point (ºC, normal pressure): Undetermined

6. Boiling point (ºC, kPa): Undetermined

7. Refractive index: Undetermined Determined

8. Flash point (ºC): Undetermined

9. Specific rotation (º): Undetermined

10. Autoignition point or ignition Temperature (ºC): Not determined

11. Vapor pressure (mmHg, 40ºC): Not determined

12. Saturated vapor pressure (kPa, 20ºC): Not determined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16. The logarithmic value of the oil-water (octanol/water) partition coefficient: Undetermined

17. The upper limit of explosion (%, V/V): Undetermined

18. Lower explosion limit (%, V/V): Undetermined

19. Solubility: Soluble in hot water, easily soluble in alkaline solution.

Toxicological data

None

Ecological data

None

Molecular structure data

1. Molar refractive index: 42.24

2. Molar volume (cm3/mol): 112.9

3. Isotonic specific volume (90.2K ): 343.4

4. Surface tension (dyne/cm): 85.5

5. Dielectric constant:

6. Dipole moment (10-24cm3):

7�� Polarizability: 16.74

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): -0.1

2. Number of hydrogen bond donors: 3

3. Number of hydrogen bond acceptors: 5

p>

4. Number of rotatable chemical bonds: 1

5. Number of tautomers: 5

6. Topological molecular polar surface area (TPSA): 101

7. Number of heavy atoms: 12

8. Surface charge: 0

9. Complexity: 245

10. Isotopic atoms Quantity: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the chemical bond positions Number of stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

This product is a sulfonamide and is toxic. When taken orally, it can cause side effects such as loss of appetite, nausea, vomiting, and diarrhea, and can have adverse effects on the liver, kidneys, etc. Operators should wear protective equipment and equipment should be sealed.
 

Storage method

Packaged in lined plastic bags, external wooden barrels or cardboard barrels. 50kg per barrel. Store and transport according to regulations on toxic substances.

Synthesis method

1. Iron powder reduction method: Obtained from o-nitrophenol to sulfonic acid through iron powder reduction or hydrogenation reduction.

2. Hydrogenation reduction method Dissolve o-nitrophenol-4-sulfonic acid in water, add 22% sodium hydroxide solution to adjust pH=6.4, and then add Raney nickel (slurry). After replacement at room temperature, pressurize to 4.41MPa with 70% hydrogen, raise the temperature to 145ºC, and react for 4 hours at 145~150ºC and 3.43~4.40MPa until the hydrogen pressure does not drop as the end point. After filtering and drying, the finished product is obtained with a yield of 77.5% and a content of more than 92%.

Purpose

Dye intermediates. Used to produce acid medium orange LR, acid medium purple, reactive purple K-3R, direct lightfast brown BRL, etc. Also used in the production of benzoxazole fluorescent whitening agents.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.chemicalchem.com/archives/22536

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search