Toluene diisocyanate manufacturer Knowledge 4-Chlorobenzenesulfonyl chloride 4-Chlorobenzenesulfonyl chloride

4-Chlorobenzenesulfonyl chloride 4-Chlorobenzenesulfonyl chloride

4-Chlorobenzene sulfonyl chloride structural formula

Structural formula

Business number 02E8
Molecular formula C6H4Cl2O2S
Molecular weight 211
label

p-Chlorobenzene sulfonyl chloride,

p-Chlorobenzenesulfonyl chloride,

aromatic sulfur compounds

Numbering system

CAS number:98-60-2

MDL number:MFCD00007439

EINECS number:202-685-3

RTECS number:DB8925000

BRN number:511583

PubChem number:24854131

Physical property data

1. Properties: White prismatic crystals.

2. Density (g/mL, 25℃): Undetermined

3. Relative vapor density (g/mL, air=1): Undetermined

4. Melting point (ºC): 53

5. Boiling point (ºC, normal pressure): Undetermined

6. Boiling point (ºC, 2kpa): 141

7. Refractive index: Undetermined

8. Flash point (ºC): 107

9. Specific rotation (º): Undetermined

10. Autoignition point or ignition temperature (ºC): Not determined

11. Vapor pressure (mmHg, 40ºC): Not determined

12. Saturated vapor pressure (kPa, 88ºC ): 0.13

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined

17. Explosion upper limit (%, V/V): Undetermined Determined

18. Lower explosion limit (%, V/V): Undetermined

19. Solubility: soluble in ethanol, insoluble in water. Decomposes when exposed to water.

Toxicological data

1. Skin/eye irritation: Standard Dresser test: rabbit skin contact, 20mg/24HREACTION SEVERITY, moderate reaction; Standard Dresser test: rabbit eye contact, 50μg/24HREACTION SEVERITY, strong reaction; 2. Acute toxicity: large Mouse oral LD50: 4250mg/kg; Mouse peritoneal cavity LDL0: 250mg/kg;

Ecological data

This substance is slightly hazardous to water.

Molecular structure data

1. Molar refractive index: 45.22

2. Molar volume (cm3/mol): 138.0

3. Isotonic specific volume (90.2K ): 359.3

4. Surface tension (dyne/cm): 45.9

5. Dielectric constant:

6. Dipole moment (10-24cm3):

7. Polarizability: 17.92

Computational ChemistryData

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 0

3. Number of hydrogen bond acceptors: 2

4. Number of rotatable chemical bonds: 1

5. Number of tautomers: none

6. Topological molecule polar surface area 42.5

7. Number of heavy atoms: 11

8. Surface charge: 0

9. Complexity: 211

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

Avoid contact with humid air, strong oxidants, and strong alkali.

Poisonous.

Storage method

1. Store in a cool, dry and well-ventilated warehouse. Keep away from fire, heat and water sources. The packaging must be sealed and protected from moisture. They should be stored separately from oxidants and alkalis, and avoid mixed storage. Equipped with the appropriate variety and quantity of fire equipment. Suitable materials should be available in the storage area to contain spills.

2. Packed in iron drums and stored in a cool, dry and ventilated place.

Synthesis method

1. The p-aminobenzene sulfonic acid method uses p-aminobenzene sulfonic acid as raw material. It undergoes diazotization and Sandmeyer reaction to generate p-chlorobenzenesulfonic acid. Add sodium hydroxide to generate sodium p-chlorobenzene sulfonate, and add chlorine to it. In sulfonic acid, react at 40-60°C for 3.5 hours. After cooling, drop into ice water, filter at 150°C, and wash to ph=5.5-6 to obtain the product. After recrystallization and purification, a high-purity product is obtained. Due to the long reaction route and high cost of the p-aminobenzenesulfonic acid method, currently no production units in our country have adopted it.

2. The chlorobenzene and chlorosulfonic acid method uses chlorobenzene and chlorosulfonic acid as raw materials. Cool the chlorosulfonic acid and sulfuric acid to below 20°C, add chlorobenzene under strong stirring, and stir at 23-25 React at ℃ for 2-3 hours, raise the temperature to 60°C, keep it for 2 hours, cool and filter to obtain the product, and obtain a high-purity product after recrystallization and purification. Raw material consumption quota: chlorosulfonic acid 2200kg/t, chlorobenzene 650kg/t, sulfuric acid 350kg/t.

3. Its preparation method is: Prepared by chlorosulfonation of chlorobenzene. Mix chlorosulfonic acid and fuming sulfuric acid and cool to below 20°C. Add chlorobenzene under strong stirring and react at 23-25°C for 2-3 hours. Then raise the temperature to 60°C and react for 2 hours. Cool, filter and wash away. Derived from acidity. In addition, it can also be obtained by reacting p-chlorobenzenesulfonic acid with chlorosulfonic acid at 60°C for 1.5 hours.

Purpose

Mainly used in the preparation of pharmaceuticals, engineering plastics, pesticide intermediates and organic synthetic raw materials p-chlorobenzenesulfonamide. Used in the production of pesticides, acaricides, acaricides, pharmaceuticals, etc.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.chemicalchem.com/archives/22664

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search