Toluene diisocyanate manufacturer Knowledge Cyclohexylmethanol Cyclohexylmethanol

Cyclohexylmethanol Cyclohexylmethanol

Cyclohexanemethanol structural formula

Structural formula

Business number 02J2
Molecular formula C7H14O
Molecular weight 114.19
label

cyclohexylmethanol,

Cyclohexanemethanol,

cyclohexylmethane,

cyclohexylmethanol,

Hexahydrobenzyl alcohol,

Hexahydrobenzyl alcohol,

C6H11CH2OH,

Benzyl Alcohol, Hexahydro-,

Cyclohexylmethane,

Cyclohexyl-Methano,

Cyclohexylmethyl Alcohol,

Hexahydro-Benzylalcoho,

Methanol, Cyclohexyl-,

Usaf Do-49,

Usafdo-49

Numbering system

CAS number:100-49-2

MDL number:MFCD00001510

EINECS number:202-857-8

RTECS number:GV5075000

BRN number:773712

PubChem number:24879554

Physical property data

1. Properties: colorless liquid.

2. Density (g/mL, 20℃): 0.928

3. Relative vapor density (g/mL, air=1): 3.2

4. Melting point (ºC): -43

5. Boiling point (ºC, normal pressure): 183

6. Boiling point (ºC, 2.4KPa): 91

7. Refractive index: 1.4649

8. Flash point (ºC): 71

9. Relative density (20℃, 4℃): 0.9295

10. Refractive index at room temperature (n20): 1.4648

11. Refractive index at room temperature (n25): 1.4628

12. Liquid phase standard combustion heat (enthalpy) (kJ·mol-1): -43773

13. Liquid phase standard claimed heat (enthalpy) (kJ·mol-1): -378.1

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16. The logarithmic value of the oil-water (octanol/water) partition coefficient: Undetermined

17. The upper limit of explosion (%, V/V): Undetermined

18. Lower explosion limit (%, V/V): Undetermined

19. Solubility: Soluble in alcohol and ether.

Toxicological data

Acute toxicity: mouse peritoneal cavity LD50: 250mg/kg;

Ecological data

This substance is slightly hazardous to water.

Molecular structure data

1. Molar refractive index: 33.89

2. Molar volume (cm3/mol): 125.0

3. Isotonic specific volume (90.2K): 301.3

4. Surface tension (dyne/cm): 33.7

5. Dielectric Constant:

6. Dipole moment (10-24cm3):

7. Polarizability: 13.43

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): 1.9

2. Number of hydrogen bond donors: 1

3. Number of hydrogen bond acceptors: 1

4. Number of rotatable chemical bonds: 1

5. Number of tautomers: none

6. Topological molecule polar surface area 20.2

7. Number of heavy atoms: 8

8. Surface charge: 0

9. Complexity: 55.4

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

Avoid contact with oxidants and acids.

Storage method

Store in a cool, ventilated warehouse. Keep away from fire and heat sources. They should be stored separately from oxidants and acidic substances, and avoid mixed storage. Keep sealed. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials.

Synthesis method

1. Chlorocyclohexane, absolute ether and magnesium chips are first used to prepare Grignard reagent, and then react with formaldehyde to generate cyclohexylmethanol.

2. Preparation method:

In a dry reaction bottle equipped with a stirrer, thermometer, reflux condenser (installed with a calcium chloride drying tube) and dropping funnel, add 26.7g (1.1mol) of magnesium chips and a small amount of crystallized iodine . In addition, 118.5g (1mol) of cyclohexyl chloride (2) was mixed with 450mL of diethyl ether dried with metallic sodium to prepare a solution. First add 100 mL of this solution and heat it in a water bath to initiate the reaction. When the reaction proceeds vigorously, remove the water bath and cool if necessary. And slowly add the remaining solution dropwise, and finish the addition in about 45 minutes. After the addition is completed, continue the reaction for 15 to 20 minutes. In a small Erlenmeyer flask, add 50g (1.67mol) of P2O5 dry paraformaldehyde, remove the dropping funnel from the above reaction bottle, and connect it to the Erlenmeyer flask with a rubber tube. With vigorous stirring, slowly add paraformaldehyde in batches. After reacting for 2 hours, cool the reaction mixture, pour it into 300g of crushed ice, and stir vigorously until it is completely decomposed. Slowly add 30% sulfuric acid to dissolve the generated magnesium hydroxide, and then evaporate the ether. The remaining water is steam distilled until no oil is evaporated. The leachate was saturated with sodium chloride, and an oily substance precipitated, which was extracted with diethyl ether. Dry over anhydrous potassium carbonate and evaporate the ether. Add 5g of fresh calcium oxide and heat in water bath for 30 minutes. Filter, distill under reduced pressure, and collect the fraction at 88-93°C/2.4kPa to obtain 50g of cyclohexylmethanol (1), with a yield of 44%. [1]

Purpose

Organic synthesis intermediates.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.chemicalchem.com/archives/23498

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search