Toluene diisocyanate manufacturer Knowledge Phenylacetamide Phenylacetamide

Phenylacetamide Phenylacetamide

Phenylacetamide Structural Formula

Structural formula

Business number 02P9
Molecular formula C8H9NO
Molecular weight 135
label

2-phenylacetamide,

2-Phenylacetamide,

a-Toluimidic acid,

Phenylacetic acid amide

Numbering system

CAS number:103-81-1

MDL number:MFCD00059193

EINECS number:203-147-0

RTECS number:AC7705000

BRN number:507886

PubChem ID:None

Physical property data

1. Character: white flake or leaf-like crystal

2. Density (g/mL, 20℃): 1.0179

3. Relative vapor density (g/mL , air=1): Undetermined

4. Melting point (ºC): 157-158

5. Boiling point (ºC, normal pressure): 280-290 (decomposition)

p>

6. Boiling point (ºC, mmHg): Undetermined

7. Refractive index: Undetermined

8. Flash point (ºC): Undetermined

9. Specific optical rotation (º): Undetermined

10. Autoignition point or ignition temperature (ºC): Undetermined

11. Vapor pressure (mmHg, ºC): Undetermined

12. Saturated vapor pressure (kPa, ºC): Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined

17. Explosion upper limit (%, V/V): Undetermined

18. Explosion lower limit (%, V/V): Undetermined

19. Solubility: Soluble in hot water and ethanol, slightly soluble in cold water, ether and benzene.

Toxicological data

Acute toxicity: mouse peritoneal cavity LD50: 430mg/kg;

Ecological data

This substance is slightly hazardous to water.

Molecular structure data

1. Molar refractive index: 39.36

2. Molar volume (cm3/mol): 123.0

3. Isotonic specific volume (90.2K ): 317.9

4. Surface tension (dyne/cm): 44.5

5. Dielectric constant:

6. Dipole moment (10-24cm3):

7. Polarizability: 15.60

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 1

3. Number of hydrogen bond acceptors: 1

4. Number of rotatable chemical bonds: 2

5. Number of tautomers: 3

6. Topological molecule polar surface area 43.1

7. Number of heavy atoms: 10

8. Surface charge: 0

9. Complexity: 116

10. Number of isotope atoms: 0

11.��Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. Avoid contact with strong oxidants, strong acids, and strong alkali.

2. Exist in mainstream smoke.

Storage method

Store in a cool, ventilated warehouse. Keep away from fire and heat sources. They should be stored separately from oxidants, acids, and alkalis, and avoid mixed storage. Equipped with the appropriate variety and quantity of fire equipment. Suitable materials should be available in the storage area to contain spills.

Synthesis method

Put styrene, sulfur, liquid ammonia and water into the autoclave, react at 165℃ and about 6.5MPa pressure, then heat and evaporate to drive away the hydrogen sulfide gas, add activated carbon to decolorize, cool, crystallize, filter and dry. Obtain phenylacetamide. This method can be improved to pipeline continuous production. Mix styrene and ammonium polysulfide liquid in a volume ratio of 1:2, and pass them through a high-pressure pipeline. The reaction temperature is 200°C, the reaction pressure is 6-7.8MPa, and the reaction time is 1.5h. The post-treatment process of the reaction product is similar to the autoclave batch method. Raw material consumption quota: styrene (99%) 1117kg/t, sulfur (98.5%) 716kg/t, liquid ammonia (99%) 539kg/t, activated carbon 47kg/t.

Another production method is to hydrolyze phenylacetonitrile (obtained from the reaction of benzyl chloride and sodium cyanide in dimethylamine aqueous solution) by heating in sulfuric acid or hydrochloric acid. Add phenylacetonitrile to concentrated hydrochloric acid, stir to dissolve, and react at 50°C for half an hour. Then slowly add water to precipitate crystals under cooling, filter after cooling, and wash with ice water to obtain the crude product. The crude product is washed with sodium carbonate solution, then washed with ice water, and after drying, relatively pure phenylacetamide can be obtained. Raw material consumption quota: benzyl chloride (95%) 1190kg/t, sodium cyanide (95%) 527kg/t, dimethylamine (industrial product) 20kg/t, sodium carbonate (industrial product) 185kg/t, sulfuric acid (92.5 %)1760kg/t.

Purpose

Used as an intermediate for drugs such as penicillin and phenobarbital. It is also used in the preparation of phenylacetic acid, spices and pesticide rodenticide raw materials.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.chemicalchem.com/archives/24666

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search