Toluene diisocyanate manufacturer Knowledge Butyl acetate Acetic acid butyl ester

Butyl acetate Acetic acid butyl ester

Butyl acetate structural formula

Structural formula

Business number 03HA
Molecular formula C6H12O2
Molecular weight 116.16
label

n-Butyl acetate,

Butyl acetate,

N-butyl acetate,

n-Butyl acetate,

Butyl acetate,

Butyl ethanoate,

1-Butyl acetate,

thinner,

Extracting agent,

Raw materials and intermediates used in ink

Numbering system

CAS number:123-86-4

MDL number:MFCD00009445

EINECS number:204-658-1

RTECS number:AF7350000

BRN number:1741921

PubChem number:24857288

Physical property data

1. Properties: colorless and transparent liquid with fruity aroma. [1]

2. Melting point (℃): -76.8[2]

3. Boiling point (℃): 126.1[3]

4. Relative density (water = 1): 0.88[4]

5. Relative vapor Density (air=1): 4.1[5]

6. Saturated vapor pressure (kPa): 1.2 (20℃)[6]

7. Heat of combustion (kJ/mol): -3463.5[7]

8. Critical temperature (℃): 305.9[8]

9. Critical pressure (MPa): 3.1[9]

10. Octanol/water partition coefficient: 1.82 [10]

11. Flash point (℃): 22 (CC) [11]

12. Ignition temperature (℃) ): 421[12]

13. Explosion upper limit (%): 7.6[13]

14. Explosion lower limit (%): 1.2[14]

15. Solubility: Slightly soluble in water, soluble in most organic solvents such as ethanol, ether, and hydrocarbons. [15]

16. Viscosity (mPa·s, 20ºC): 0.734

17. Heat of evaporation (KJ/kg, b.p.): 309.3

18. Heat of formation (KJ/mol): 499.9

19. Specific heat capacity (KJ/(kg·K), 19.41ºC, constant pressure): 2.08

20. Specific heat capacity (KJ/(kg·K), 20ºC, constant pressure): 1.91

21. Conductivity (S/m, 25ºC): 13×10-9

22. Volume expansion coefficient (K-1): 0.0011

23. Critical pressure (MPa): 3.14

24. Eccentricity factor: 0.410

25. Solubility parameter (J·cm-3)0.5: 17.582

26 .van der Waals area (cm2·mol-1): 1.049×1010

27.van der Waals volume (cm3·mol-1): 73.230

28. Gas phase standard combustion heat (enthalpy) (kJ·mol– 1): -3590.83

29. Gas phase standard claims heat (enthalpy) (kJ·mol-1): -485.22

30 .Liquid phase standard combustion heat (enthalpy) (kJ·mol-1): -3547.24

31. Liquid phase standard claimed heat (enthalpy) (kJ·mol -1): -528.82

32. Liquid phase standard hot melt (J·mol-1·K-1): 228

Toxicological data

1. Acute toxicity[16]

LD50: 10, re-distillation.

3. Just carry out distillation, ultra-clean filtration and ultra-clean packaging of industrial butyl acetate.

4. Preparation method:

In a reaction bottle equipped with a reflux condenser, add 61g of 98% formic acid (1.33mol) and 31g of absolute ethanol (2) (0.67 mol), one particle of zeolite, heated to reflux for 24 hours. Change to a distillation device for distillation, collect fractions below 62°C, saturate the leachate with sodium chloride, and then wash with saturated sodium bicarbonate and saturated sodium chloride solutions in sequence. Dry with anhydrous sodium sulfate, fractionate, and collect the fraction at 53-54°C to obtain 36 g of butyl formate (1), with a yield of 72%. [26]

Purpose

1. Excellent organic solvent, good for cellulose acetate butyrate, ethyl cellulose, chlorinated rubber, polystyrene, methacrylic resin and many natural resins such as tannin, manilla gum, dammar resin, etc. Has good solubility properties. It is widely used in nitrocellulose varnish, as a solvent in the processing of artificial leather, fabrics and plastics, as an extractant in various petroleum processing and pharmaceutical processes, and also used in spice compounding and apricots, bananas, pears, pineapples, etc. Ingredients of various fragrances. Determination of metals thallium, tin and tungsten. Determination of molybdenum and rhenium. Antibiotic extractant.

2. Analytical reagents and solvents, used for the determination of thallium, tin, tungsten, molybdenum and rhenium, etc. Also used as a solvent for plastics, spray paint, nitrocellulose, artificial leather, etc.

3. Cosmetic solvents. It is mainly used as the medium boiling point main solvent for nail polish and other cosmetics to dissolve film-forming agents such as nitrocellulose, acrylic resin, and alkyd resin. It is often mixed with ethyl acetate, and the added amount is about 20% to 25%. In addition, it is also used to prepare nail polish remover, with an added amount of about 30%.

4. Used as solvents for spray paint, artificial leather, film, nitrocellulose, gum, etc. and for preparing spices and medicines. [25]

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.chemicalchem.com/archives/26147

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search