Betaine Betaine

Betain structural formula

Structural formula

Business number 02V9
Molecular formula C5H11NO2
Molecular weight 117.15
label

betaine,

betaine,

betaine anhydrous,

Trimethylhydroxymethylammonium,

(Carboxymethyl)trimethylammonium inner salt,

Oxyneurine,

Antioxidants and fungicides

Numbering system

CAS number:107-43-7

MDL number:MFCD00012123

EINECS number:203-490-6

RTECS number:DS5900000

BRN number:3537113

PubChem number:24891663

Physical property data

1. Properties: Colorless crystals or white crystalline powder, odorless and sweet.

2. Density (g/mL, 20℃): 1.00

3. Relative vapor density (g/mL, air=1): Undetermined

4. Melting point (ºC): 301-30

5. Boiling point (ºC, normal pressure): Undetermined

6. Boiling point (ºC, kPa): Undetermined

p>

7. Refractive index (D20): Not determined

8. Flash point (ºC): Not determined

9. Specific rotation (ºC): Undetermined

10. Autoignition point or ignition temperature (ºC): Undetermined

11. Vapor pressure (mmHg, 20ºC): Undetermined

12. Saturated vapor pressure (kPa, ºC): Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined

17. Explosion upper limit (%, V/V): Undetermined

18. Explosion lower limit (%, V/V): Undetermined

19. Solubility: soluble in water, methanol, ethanol, slightly soluble in ether.

Toxicological data

1. Acute toxicity: subcutaneous LD50 in mice: 10800mg/kg; intravenous LD50 in mice: 830mg/kg;

Ecological data

This substance is slightly hazardous to water.

Molecular structure data

None

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): 0.5

2. Number of hydrogen bond donors: 0

3. Number of hydrogen bond acceptors: 2

4. Number of rotatable chemical bonds: 1

5. Number of tautomers: none

6. Topological molecule polar surface area 40.1

7. Number of heavy atoms: 8

8. Surface charge: 0

9. Complexity: 87.6

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determined number of chemical bond stereocenters: 0

14. Uncertain number of chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. Chloroacetic acid and trimethylamine in the chemical synthesis method are toxic, the equipment should be sealed, and the operators should wear labor protection supplies.

Storage method

Stored in a cool, ventilated warehouse. Keep away from fire, heat and water sources. should be kept away from oxidizer, do not store together. Equipped with the appropriate variety and quantity of fire equipment. The storage area should be equipped with emergency release equipment and suitable containment materials.

Synthesis method

(1) Extraction method. The mother liquor of beet sugar production contains 12%-15% betaine, which can be directly recycled. Heat 300 parts of the mother liquor to 50°C, add 80 parts of calcium chloride, stir for a certain period of time and then filter while hot. The filtrate is acidified with hydrochloric acid and then cooled to 20-30°C for crystallization. After separation and drying, about 30 parts of betaine are obtained.
(2) Synthesis method. Obtained from the quaternization of chloroacetic acid and trimethylamine.
Use 16% sodium hydroxide solution to neutralize 195 parts of 48.6% chloroacetic acid aqueous solution into sodium chloroacetate solution, and then mix with 360 parts of 16.4% trimethylamine The solution was mixed, aerated at 50°C for 1 hour, and then at 80°C for another 1 hour. The reactant was diluted and adsorbed by an ion resin (Dowex-50-8), and then eluted with ammonia water to obtain a betaine solution. The finished product is obtained through vacuum concentration and crystallization.

3.The mother liquor of sugar beet production contains 12% to 15% betaine, which can be directly recovered. It can also be obtained by quaternization of chloroacetic acid and dimethylamine.

Purpose

1. It has anti-tumor effect. It can be used as a flux in welding and in organic synthesis. It can be used as a hepatoprotective agent in medicine. This product can also be used in organic synthesis.

2.The addition of betaine to the feed can protect the vitamins in the feed, making the feed resistant to high temperatures and having a long storage period, which can greatly improve the quality of the feed. utilization rate and can also reduce costs. Adding 0.05% sweet alkali to chicken feed can replace 0.1% methionine; adding betaine to bait has a feeding attraction effect on fish and shrimp, and can be used in large amounts span style=”font-family:Arial;”>It is used as a puffing agent for aquatic products; adding betaine to pig feed can stimulate the appetite of pigs and increase the lean meat rate. 1kg betaine is equivalent to 3.5kg methionine. The ability of betaine to provide methyl groups is 1.2 times that of choline chloride and 3.8 times that of methionine.

This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.chemicalchem.com/archives/26277

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search