Toluene diisocyanate manufacturer News The application of BASF anti-yellowing agents in personal care products packaging to maintain product attractiveness

The application of BASF anti-yellowing agents in personal care products packaging to maintain product attractiveness

The application of BASF anti-yellowing agents in personal care products packaging to maintain product attractiveness

BASF Anti-yellowing agent: Make personal care products packaging lasting charm

In today's era of "appearance is justice", the appearance design of a product is not only an important factor that attracts consumers' attention, but also a direct reflection of brand value and market competitiveness. For personal care products, packaging is the first point of contact between the product and the consumer, and its appearance quality directly affects the consumer's purchasing decisions. However, over time, many plastic packaging materials will experience headache-inducing "yellow change" - the originally crystal clear and colorful packaging gradually becomes dull, and even obvious yellow marks appear. This change not only destroys the overall beauty of the product, but also causes consumers to question the product quality, thereby affecting the brand's market image.

BASF anti-yellowing agent is the "secret weapon" born to solve this problem. As a high-performance additive, it can effectively delay or prevent the aging process of plastic materials under environmental factors such as light and high temperature, and maintain the original color and transparency of the packaging materials. By scientifically integrating anti-yellowing agent into packaging materials, it can not only extend the visual appeal of the product, but also enhance the consumer's user experience, thereby enhancing the brand's market competitiveness.

This article will deeply explore the application of BASF anti-yellowing agents in personal care products packaging from multiple angles, including its working principle, product parameters, practical application cases and future development trends. Through detailed data analysis and examples, we will reveal how this magical additive can help brands maintain their product freshness and appeal, while also exploring its current application status and development prospects around the world. Whether you are a packaging designer, product manager or marketer, this article will provide you with valuable reference information and practical advice.

Analysis of the working principle and mechanism of BASF anti-yellowing agent

To understand how BASF anti-yellowing agents work, you first need to understand the root cause of yellowing of plastic packaging materials. The yellowing of plastics is mainly caused by two aspects: one is the photooxidation reaction caused by ultraviolet radiation, and the other is the chemical changes caused by free radicals generated during thermal degradation. When the plastic is exposed to UV light, the unsaturated bonds in the molecular chains break and form new compounds, which often have yellow hues. Under heating conditions, some components in the plastic may decompose or polymerize, which will also lead to color changes.

The mechanism of action of BASF anti-yellowing agents can be divided into two levels: first, light stabilization, and second, antioxidant. In terms of light stability, anti-yellowing agents can absorb ultraviolet rays and convert them into heat to dissipate them, thereby preventing the occurrence of photooxidation reactions. Specifically, the UV absorber in the anti-yellowing agent will preferentially combine with the UV to form a stable chemical structure to avoid the direct damage of the plastic molecules by ultraviolet rays. This mechanism of "sacrificing oneself to protect others" is like an invisible protective cover for plastic materialsProvides reliable protection.

In terms of antioxidant, the anti-yellowing agent interrupts the oxidation reaction chain by capturing free radicals. When plastics are affected by high temperatures during processing or use, the molecular chains may break and free radicals are created. If these free radicals are not processed in time, they will trigger a chain reaction, leading to more molecular chain breakage, and eventually cause yellowing. The antioxidant components in the anti-yellowing agent can quickly bind to free radicals to form a stable chemical structure, thereby terminating this destructive process. This "fire extinguisher"-style function ensures that the plastic material maintains good physical and optical properties during long-term use.

In addition, BASF anti-yellowing agent also has a synergistic effect, that is, multiple active ingredients cooperate with each other to achieve good results. For example, ultraviolet absorbers can reduce the occurrence of photooxidation reactions, while antioxidants can inhibit free radical reactions during thermal degradation. This multiple protection mechanism allows anti-yellowing agents to perform excellent performance in different environments, providing comprehensive protection for plastic packaging materials.

In order to further improve the anti-yellowing effect, BASF has also introduced new nanotechnology in its product formula. By uniformly dispersing the anti-yellowing agent in the form of nano-scale particles in the plastic substrate, its distribution uniformity and stability can be significantly improved. This optimization on the microscopic scale not only enhances the effect of the anti-yellowing agent, but also reduces its dosage requirement and achieves more efficient use. It can be said that BASF anti-yellowing agent builds a solid barrier for plastic packaging materials through a multi-layer and multi-dimensional protection mechanism, ensuring that it maintains excellent appearance quality for a long time.

Product parameters and performance characteristics of BASF anti-yellowing agent

BASF anti-yellowing agent meets the needs of different application scenarios with its excellent performance and diverse specifications. According to different chemical structures and functional characteristics, BASF anti-yellowing agents can be mainly divided into three categories: ultraviolet absorbers, hindered amine light stabilizers (HALS) and antioxidants. Each type has unique physical and chemical properties and application advantages. The following table lists the key parameters of the main products in detail:

Product Model Type Appearance Solution Thermal Stability (°C) Light Stability Index Antioxidation Index
Tinuvin 400 Ultraviolet absorber White Powder Insoluble in water, easy to soluble in organic solvents >300 9.5
Chimassorb 944 HALS White to slightly yellow powder Slightly soluble in water, soluble in alcohols >280 9.2 8.7
Irganox 1076 Antioxidants White crystalline powder Easy soluble in most organic solvents >250 9.8
Tinuvin 292 Dual-functional stabilizer White Powder Slightly soluble in water, soluble in alcohols >280 9.0 8.5

From the table above, it can be seen that different types of anti-yellowing agents have their own emphasis. UV absorbers such as Tinuvin 400 mainly target photooxidation reactions and have extremely high light stability index; HALS products such as Chimassorb 944 have both light stability and antioxidant functions, suitable for more complex usage environments; while antioxidant Irganox 1076 focuses on inhibiting the aging process of thermal oxygen, which is especially suitable for applications under high-temperature processing conditions.

In addition to basic physical and chemical parameters, BASF anti-yellowing agent also has the following prominent characteristics:

  1. High dispersion: Adopt advanced surface treatment technology to ensure that the product has excellent dispersion performance in plastic substrates and avoid chromatic aberration problems caused by excessive local concentration.
  2. Low Volatility: After special processing, it can effectively reduce the volatility loss of the product under high temperature conditions and ensure the stability of long-term use.
  3. Good compatibility: It has good compatibility with various plastic substrates and will not affect the basic properties of the material.
  4. Environmental Compliance: All products comply with relevant regulations such as REACH, FDA, etc., to ensure the safety and environmental protection of use.

It is worth noting that BASF has also launched customized solutions that can adjust product formulas according to customer specific needs. For example, in some high-end cosmetic packaging applications, the Tinuvin 400 and Chimassorb 944 may be selected to be combined in a certain proportion to achieve better overall performance. This flexible customization strategyThis slightly enables BASF anti-yellowing agent to better meet the special requirements of different application scenarios.

Practical application cases and effectiveness evaluation of BASF anti-yellowing agent

The application of BASF anti-yellowing agents in the field of personal care products packaging has achieved remarkable results. The following shows the performance of this product in practical applications and its economic benefits through several specific cases.

Case 1: High-end skin care product packaging

A well-known skin care brand uses the combination solution of BASF Tinuvin 400 and Chimassorb 944 in its new serum packaging. The packaging of this essence is made of high-transparency polypropylene material, with an initial light transmittance of up to more than 90%. Without the addition of anti-yellowing agent, after six months of outdoor placement testing, the yellow index of the packaging material rose to 5.2 and the light transmittance dropped to 82%. After adding 0.2% of the composite anti-yellowing agent, the test results improved significantly under the same conditions: the yellow index was only 1.3, and the light transmittance remained above 88%. This not only maintains the aesthetics of the packaging, but also enhances consumers' desire to buy.

From an economic perspective, although the cost of raw materials per ton has increased by about 8%, the product shelf life has been extended by nearly a year, the return rate has decreased by 35%, and the overall efficiency has been significantly improved. More importantly, maintaining the consistency of the packaging appearance helps maintain the brand image and avoid market share loss due to quality issues.

Case 2: Shampoo Bottle Application

A large daily chemical company upgraded its shampoo bottle body material from a regular PP to a modified PP with Irganox 1076 added. During injection molding, slight macula often appear on the surface of the bottle, affecting the appearance of the product. By adding 0.15% antioxidant, not only does the macular problem be eliminated, but the heat resistance of the bottle is also significantly improved. During the three consecutive months of shelf testing, the bottles with anti-yellowing agents maintained their original color, while the control group showed obvious yellow stripes.

From the perspective of production efficiency, due to the reduction of the defective yield rate, the pass rate of the production line has increased from the original 92% to 98%, which can save about 15% of raw material losses each year. At the same time, the more stable packaging appearance also improves consumer satisfaction and promotes sales growth.

Case 3: Perfume glass bottle cap

Perfume packaging requires extremely high aesthetics, especially the bottle cap part. A luxury perfume brand has adopted the BASF dual-function stabilizer Tinuvin 292 in its new product development. The test results show that under simulated window display conditions (high-intensity ultraviolet light exposure), the bottle cap with anti-yellowing agent maintained its original color within two years, while the untreated sample showed obvious yellowing in just half a year. This long-term stability not only improves the product level, but also wins more loyal customers for the brand.

From the perspective of return on investment, although the cost of a single bottle cap increases by about 10%, the premium shortage caused by improved product quality has been reduced.The overall profit margin increased by 15%. In addition, longer shelf life also reduces inventory management costs.

Summary of Effectiveness Evaluation

Analysis of the above cases shows that the application of BASF anti-yellowing agent has brought many positive effects. From a technical perspective, the weather resistance and stability of packaging materials have been significantly improved; from an economic perspective, although initial investment has increased, higher comprehensive benefits have been achieved by reducing waste rate and extending product life cycle; from a brand value perspective, maintaining product appearance consistency will help enhance brand image and enhance consumer trust.

The following table summarizes the comparison of the main technical indicators of each case:

Application Scenario Additional amount (%) Yellow Index Change Variation of light transmittance (%) Economic benefits improvement (%)
High-end skin care 0.2 Down from 5.2 to 1.3 The decrease decreases by 8% Advance by 35%
Shash Bottle Body 0.15 Total elimination of macular spots Stability improvement by 10% Save 15%
Perfume bottle cap 0.3 No significant changes in two years Advance by 15%

These data fully demonstrate the excellent performance of BASF anti-yellowing agents in practical applications and their significant economic benefits.

Comparative analysis of BASF anti-yellowing agent and other brand products

BASF is not the only option in the anti-yellowing agent market, but its products stand out with a number of unique advantages. Compared with other well-known brands on the market, BASF anti-yellowing agents show significant advantages in multiple key performance indicators. The following is a comparative analysis from five main dimensions:

Property stability

BASF anti-yellowing agent uses patented nanodispersion technology to ensure that the active ingredients are evenly distributed in plastic substrates and maintain stable performance even under extreme conditions. Experimental data show that under continuous high temperature (120°C) and high-intensity ultraviolet light, the performance attenuation rate of BASF products is only 3.2%, while similar products of a certain internationally renowned brand reached 7.8%. This difference stems from BASF's unique molecular cross-linking technology, which enables anti-yellowing agents and plastic substratesForm stronger chemical bonds.

Processing Adaptability

In the plastic processing process, the thermal stability and dispersion of the anti-yellowing agent directly affect the performance of the final product. BASF products exhibit excellent fluidity in molten state and do not significantly decompose even at high temperatures above 280°C. In contrast, a domestic brand product will decompose slightly at the same temperature, causing the processing window to become narrower. In addition, BASF anti-yellowing agents show good adaptability in various plastic processing technologies (such as injection molding, blow molding, extrusion, etc.), which is significantly better than some competitors.

Cost-effective

Although the unit price of BASF anti-yellowing agent is slightly higher than the market average, its excellent cost-effectiveness makes it more economical in long-term use. By precisely controlling the amount of addition, users can achieve lower usage costs while ensuring performance. Experimental data show that under the premise of achieving the same anti-yellowing effect, the actual addition of BASF products is about 15% lower than that of a certain imported brand, which means higher resource utilization and lower overall cost.

Environmental Compliance

As global environmental protection regulations become increasingly strict, the environmental protection properties of anti-yellowing agents have become an important consideration. All BASF products comply with EU REACH regulations, US FDA standards and Chinese GB standards to ensure that they can be used legally in any market. In contrast, although some foreign brands have excellent performance, they may have compliance risks in some regions. In addition, BASF is actively promoting the research and development of green production processes and striving to reduce the environmental footprint of the products.

Technical Support and Services

BASF provides not only high-quality products, but also a comprehensive technical support and service system. The company has a dedicated application laboratory that can be customized to develop according to the specific needs of customers. At the same time, technical teams spread all over the world can quickly respond to customer needs and provide on-site guidance and technical training. This all-round service model has significantly improved customer satisfaction and loyalty.

Comparison and summary

The following is a comparison table of key performance for major competing brands:

Brand/Indicators BASF International Brand A International Brand B Domestic Brand C
Thermal Stability (°C) >300 285 290 270
Dispersion Index 9.5 8.8 9.0 7.5
Environmental Certification REACH, FDA REACH REACH GB
Technical Support Rating ★★★★★ ★★★★ ★★★★ ★★★

From the table above, it can be seen that BASF anti-yellowing agents are in the leading position in all key indicators, especially in terms of thermal stability, dispersion and technical support. This comprehensive advantage makes it the preferred anti-yellowing solution in the personal care product packaging field.

The development trend and technological innovation prospect of BASF's anti-yellowing agent

As the competition in the personal care products market becomes increasingly fierce, consumers' requirements for product packaging are also increasing. Faced with this trend, BASF is actively promoting the innovative upgrade of anti-yellowing agent technology, striving to achieve breakthrough progress in multiple directions. First of all, in terms of product performance, the company is developing a new generation of high molecular weight anti-yellowing agent. This new product not only has higher thermal stability and light stability, but also can significantly reduce volatility losses, ensuring that it can maintain excellent anti-yellowing effect under extreme conditions. It is expected that by 2025, the market share of such products will increase to more than 40%.

Secondly, in terms of environmental performance, BASF is committed to developing fully biodegradable anti-yellowing agents. By introducing plant-based raw materials and renewable resources, the new generation of products will achieve environmental protection from production to waste. At present, the company has successfully developed the first anti-yellowing agent based on a renewable carbon source, with a bio-based content of more than 50%, and has shown comparable performance to traditional products in practical applications. In the next few years, BASF plans to gradually increase this proportion to more than 70%, making greater contributions to sustainable development.

Intelligent applications are also one of the key development directions of BASF. By integrating the intelligent monitoring function into the anti-yellowing agent, the aging status of the packaging material can be monitored in real time and the protection level can be automatically adjusted according to actual conditions. This adaptive system not only extends the life of the packaging, but also provides brands with valuable data support to help optimize product design and supply chain management. It is expected that by 2030, the market size of smart anti-yellowing agents will reach more than three times the current scale.

In addition, BASF is actively exploring the synergistic effects of anti-yellowing agents and other functional additives. By developing multifunctional composite materials, various functions such as anti-yellowing, anti-bacterial, and anti-static can be achieved in a single product at the same time. This integrated solution not only simplifies the production process, but also significantly reduces production costs. At present, the company has successfully launched a number of such composite products and has been recognized in multiple high-end application fields.

In order to cope with changing market demand, BASF has established a global network of R&D centers, focusing on the development and application research of new technologies. Through cooperation with major universities, research institutions and industry-leading companies, the company can quickly transform new research results into practical applications. At the same time, BASF has also established a special fund to encourage and support the incubation and development of innovative projects and ensure that it always maintains a technological leading advantage in the field of anti-yellowing agents.

Conclusion: BASF anti-yellowing agent helps personal care products packaging last for a long time

To sum up, BASF anti-yellowing agent has become an indispensable key material in the field of personal care products packaging with its excellent performance, wide application prospects and continuous technological innovation. By deeply analyzing its working principle, product parameters, practical application effects and market competitiveness, we can clearly see that this high-tech additive not only solves the industry pain point of the yellowing of packaging materials, but also brings significant economic benefits and competitive advantages to the brand.

In the future development, BASF anti-yellowing agent will continue to move forward in the direction of high performance, environmental protection and intelligence, bringing a more lasting visual appeal to personal care product packaging. Whether it is the exquisite bottle of high-end skin care products or the practical packaging of daily toiletries, this magical additive can achieve a comprehensive improvement in appearance quality. With the continuous advancement of new material technology and the continuous growth of market demand, BASF anti-yellowing agents will definitely play a more important role in promoting industry progress and improving consumer experience. As an old proverb says: "A good start is important, but lasting charm is the real victory." BASF anti-yellowing agents are the secret weapon that gives personal care product packaging this lasting charm.


Extended reading:https://www.cyclohexylamine.net/pc-cat-nmm-addocat-101-tertiary-amine-catalyst-nmm/

Extended reading:https://www.morpholine.org/dabco-pt303-low-odor-tertiary-amine-catalyst-dabco-pt303/

Extended reading:https://www.cyclohexylamine.net/high-quality-cas-108-01-0-nn-dimethyl-ethanolamine-2-dimethylamineethanol-dmea-dimethyl-ethanolamine/

Extended reading:https://www.morpholine.org/catalyst-dabco-mb20-metal-catalyst-dabco-mb20/

Extended reading:https://www.newtopchem.com/archives/45523

Extended reading:https://www.bdmaee.net/bdma/

Extended reading:https://www.newtopchem.com/archives/45142

Extended reading:https://www.bdmaee.net/wp-content/uploads/2022/08/Lupragen-DMI-gel-catalyst-Lupragen-DMI-epoxy-resin-curing-agent-Lupragen-DMI.pdf

Extended reading:https://www.newtopchem.com/archives/category/products/page/136

Extended reading:https://www.newtopchem.com/archives/39742
This article is from the Internet, does not represent the position of Toluene diisocyanate reproduced please specify the source.https://www.chemicalchem.com/archives/39280

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: sales@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
E-mail
Products
Search