Epoxy curing agent/Polyurethane rigid foam

Epoxy curing agent/Polyurethane rigid foam

Overview:

Product Name: Lupragen DMI Polyurethane Gel Catalysts

Alias: Lupragen DMI, Gel Catalyst Lupragen DMI, Epoxy Curing Agent Lupragen DMI, Polyurethane Rigid Foam Lupragen DMI

Product Description: Lupragen DMI is used in polyurethane hard foam and microcellular elastomers, belongs to gel catalyst.

Physical and Chemical Properties

Lupragen DMI appearance is light yellow crystal or white prismatic crystal.

Melting point:39-41°C

Boiling point:93~94℃.

Product application

Lupragen DMI is used in polyurethane rigid foam and microcellular elastomers, and is a gel catalyst.

Lupragen DMI is used as a curing agent for epoxy resin and can be widely used in epoxy resin bonding, coating, casting, encapsulation, impregnation and composite materials.

Shelf life.

Keep unopened for two years

Storage and transportation:

Should be sealed and stored in dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.