Dabco MP601/delayed polyurethane catalyst

Dabco MP601/delayed polyurethane catalyst

Overview:

Product Name: Dabco MP601

Alias: Dabco MP601, Delayed Polyurethane Catalyst, Dabco Delayed Polyurethane Catalyst, Dabco Delayed Catalyst

Product Description: Dabco MP601 Delayed Polyurethane Catalysts

Product Physical Properties:

Appearance: colorless to light yellow liquid

Viscosity(25℃,mPa.s):183.3

Density (25℃,g/cm3): 1.09

Water solubility: soluble in water

Flash point (PMCC,℃): 84

Hydroxyl value (mgKOH/g): 546

Brief introduction.

Dabco MP601 catalyst is a balanced tertiary amine with delayed polyurethane foaming developed for fast release polyurethane high resilience (HR) molded foam systems. Dabco MP601 catalyst provides an effective balanced reaction for complex parts with flowability, which can help customers reduce cycle times and increase productivity.

Typical Physical Properties Table.

Appearance Colorless to light yellow transparent liquid

Specific Gravity 1.09

Viscosity @25℃ mPa.s 183

Water solubility @25°C Fully soluble

Flash point, ℃ 84

Features.

Delayed polyurethane foaming time, fluidity, can be used in complex molding molds for high resilience sponges

Balanced polyurethane catalyst, wide process operating range

Reduced demolding time for increased productivity

Suitable for a wide range of TDI, T/M, M/T and MDI system polyurethane foams.

Recommendations for use.

Dabco MP601 Catalyst can be used to manufacture all types of polyurethane high resilience foam moldings.

Dabco MP601 Catalyst can be combined with other polyurethane catalyst products to achieve process performance.

Product Usage:

DABCO MP601 is a tertiary amine catalyst with both delayed and balanced properties developed for fast release high resilience (HR) molded foam systems;

DABCO MP601 provides an effective balance of reactivity with excellent flow and open-cell properties for rapid release systems to help customers reduce cycle time and increase productivity.

Shelf Life.

Keep unopened for two years

Storage and Transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packing:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.